(b) If any critical speed lies within, or close to, the operating ranges for idling, power-on, and autorotative conditions, the stresses occurring at that speed must be within safe limits. This must be shown by tests.
(c) If analytical methods are used and show that no critical speed lies within the permissible operating ranges, the margins between the calculated critical speeds and the limits of the allowable operating ranges must be adequate to allow for possible variations between the computed and actual values.
[Amdt. 29–12, 41 FR 55472, Dec. 20, 1976]
NEXT: Sec. 29.935 - Shafting joints.
PREVIOUS: Sec. 29.927 - Additional tests.